The horizontal waste paper packing machine is composed of seven parts: framework, box, hydraulic control system, main oil cylinder, oil supply system, electrical control system, hydraulic oil cylinder and hydraulic lock box door.
The frame is composed of a vertical pole, a lower beam, a middle beam and a top beam. The upper end and the lower side beam are connected to support all the racks with supporting points and bear complicated loads. Therefore, select high-quality stainless steel plates to ensure sufficient compressive strength.
The box is divided into 1 box and 1 shrink box. The door is connected by a locking cylinder, a door hinge uranium and other components. Lock the barrel to lock the door and loosen it to facilitate the door opening and closing. The negative part is placed under the gift box. The wooden floor is made of carbon steel plate, and the packaging of soldering iron and thin iron wire is convenient.
3. Hydraulic control system
The system is composed of fuel tank, gear pump (80 type) electric pump set, hydraulic multi-way valve, oil delivery pipe, and cylinder. Gear oil around 46 # must be applied. The system and electronic device components cooperate with each other, and can manipulate individual behaviors in every job of the waste paper packer.
4. Master cylinder
The main engine cylinder plug has a diameter of 160MM and its cross-section is 251CM2. The total working pressure of the waste paper packer is 800KN. The limit switch limits the lift of the plunger pump. The main cylinder system is composed of the main engine block, plunger pump, sealing ring, guide ring, top block, etc., with excellent sealing characteristics.
The plunger pump and the seamless pipe in the cylinder are welded and welded together, which has sufficient compressive strength. The plunger pump makes repeated movements in the cylinder. When the plunger pump rises, the force is transmitted to the top block in the small box, and the block in the small box is reduced.
5. Key oil supply system
This system is the energy source for the waste paper packer. Its advantages and disadvantages are particularly important for waste paper packers. Therefore, high-quality gear oil beyond 46 # must be applied. The system is composed of diesel fuel tank, 11KW motor, 80-type piston rod gasoline pump, ZS1 series hydraulic directional valve, speed regulating valve, unloading valve and filtering device.
6. Part of the electrical control system
The machine's main switching power supply is three-phase 380V 50Hz AC current. The cross section of the output power electric conductor shall not be less than 16mm2 (copper).
7. Working pressure cylinder
The effect of these is to feed raw materials into compression bags and preload them. Working pressure 20-25 MPA. The journey is 2700 MM.