The hydraulic pump is the power source of the complete automatic hydraulic baler
,and it can be described as the heart of the complete equipment.
The position of the hydraulic pump in the baler
equipment is very important.Next,Nick Machinery will explain to you the reasons and solutions for the hydraulic pump oil pump not draining oil:
1.If the rotation direction is wrong,stop immediately and correct the rotation direction of the motor.If it continues,the oil pump will be burned and damaged.
2.The oil pump has no power,repair the coupling.
3.The pump shaft is broken and the rotor has no power.Repair the oil pump.
4.The suction pipe is blocked, check the suction pipe.
5.The oil tank filter is blocked, clean the filter or replace the filter.
6.The capacity of the fuel tank filter is insufficient. Replace with a larger capacity,which is more than 2 times the pump
7.If the oil viscosity is too high,change the oil type and install a heater.
8.The motor speed is insufficient.Replace the motor with the specified speed of the oil pump.
9.The suction pipe is not well sealed and leaks. Check the suction pipe.
10.The oil tank filter is on the top of the oil level,refuel or redesign the oil level.
11.The pump blade cannot slide out of the rotor groove.Repair or replace the oil pump.
Nick brand hydraulic baler
is a professional company engaged in the development,production,sales and service of hydraulic machinery and packaging machinery.It builds professionalism with concentration,reputation with integrity,and sales with service.
Welcome to inquire:86-029-86031588 For more information,please visit our website:www.nkbaler.com