are used more and more widely in daily life, and the models of hydraulic balers
used by different companies are not the same, but the common faults and troubleshooting methods are similar.
There are not many common failures of hydraulic baler. Here are a few more typical examples for you to introduce.
The staff pointed out that the common fault is still unstable movement and obvious vibration, which is slower. The reason is that there is air in the hydraulic system
. The solution is very simple. Just open the air release valve on the top to discharge the gas.
When the machine is stopped, the hydraulic pressure
will drop rapidly. The reason for this is also well understood. It is the one-way valve, the sealing port is damaged or the sealing ring is damaged. At this time, only these damaged components need to be replaced, and the The fault is quickly resolved.
Of course, there is another problem that the hydraulic return stroke is too slow. This problem is due to the dirty oil, so the solution is to replace the working oil.
These methods are typical, and you may encounter them in practical applications. You must accumulate them in normal times to make it more convenient for you to deal with them.
NICKBALER has a professional after-sales service team. If you encounter any problems during the use of the product, you can contact us at any time 86-29-86031588