1. Put the machine flat, without shaking, then add 46# or 68# hydraulic oil, and put the machine 50 kg according to the size of the equipment.
2. The motor of this machine is 380V-50HZ, please check whether the local voltage is the same as this machine, after connecting the wire (wire diameter is not less than 6M2*3 phase), turn on the power to see the direction of rotation of the motor (indicated by the arrow) clockwise When the direction is wrong, adjust the connection of the two live wires.
This machine should be operated and maintained by a dedicated person. Turn off the main power supply after get off work every day, clean up foreign objects around the machine, clean up foreign objects in the machine, and add appropriate lubricating oil to the active position to reduce machine wear.
Regularly check whether the screws in each part of the machine are loose. The parts of the new machine that are easy to loosen are: the small flange screw of the middle shaft and the four 5/8 large screws in the pressure plate, which should be reinforced regularly.
Before starting to pack, first check whether the doors are closed, whether the door lock is in place, whether the knife and scissors buckle is buckled, and whether the safety chain is buckled on the handle. Do not pack any of the above parts without buckling to avoid accidents.
When the machine is operating, people should stand beside the machine and do not reach into the door with their heads, hands and body parts to avoid crushing injuries.
Nick Machinery is a manufacturer specializing in the production of hydraulic balers
. It provides vertical and horizontal balers with high quality and low price. They are sold overseas and our after-sales service centers are located in many places.www.nkbaler.com