Heavy Waste hydraulic Shear
NICK hydraulic metal shear widely used for the processing equipment of ZTE scrap steel shearing, used for light and thin materials, steel bars, steel plates, round steel, steel pipes, scrap steel, copper scrap and other structural parts, stainless steel, metal briquettes, automobiles, aluminum alloys, copper parts, steel wires, Iron wire, waste steel and other materials are cut by cold work.
1.The scrap metal shear adopts hydraulic transmission.
2.Compared with the mechanical transmission shear, it has the advantages of small volume, small inertia, smooth movement, simple operation, flexible operation, large cutting section, convenient adjustment of the scissors mouth, etc.
3.The operation is safe and easy to use Realize overload protection.shearing machine has manual, automatic and remote control functions.
4.The operation control is convenient and simple. The shear mouth starts and stops at any position where the work process is heavy, and the size of the shear mouth can be arbitrarily controlled according to the size of the cut material.
5.To obtain economic work efficiency.The rapid design of the gantry shearing machine can change the speed faster without increasing the power of the motor and the displacement of the oil pump.
|
Model |
Cutting pressure (T) |
Capacity (T/H) |
Blade length (MM) |
Cutting speed (T/M) |
Power (Kw) |
|
NKLMJ-315 |
315 |
3-5 |
1200 |
2-4 |
22*2 |
|
NKLMJ-400 |
400 |
4-7 |
1400 |
2-4 |
37*2 |
|
NKMJ-500 |
500 |
5-8 |
1500 |
2-4 |
37*2 |
|
NKLMJ-630 |
600 |
8-10 |
1600 |
2-4 |
45*3 |
|
NKLMJ-800 |
800 |
12-15 |
1800 |
2-4 |
55*3 |
|
NKMJ-1000 |
1000 |
15-20 |
2000 |
2-4 |
55*4 |
|
NKLMJ-1250 |
1250 |
20-30 |
2500 |
2-4 |
55*4 |
|
NKLMJ-1500 |
1500 |
30-50 |
2500 |
2-4 |
75*4 |
|
NKLMJ-2000 |
2000 |
60-80 |
2700 |
2-4 |
75*6 |
