The structure of vertical hydraulic baler
Vertical hydraulic baler is mainly composed of hydraulic cylinder, motor and oil tank, pressure plate, box body and base, upper door, lower door, door latch, Baling Press belt bracket, iron support, etc.
1. The machine is not working, but the pump is still running
2. The rotation direction of the motor is reversed. Check the direction of rotation of the motor;
3. Check the hydraulic pipeline for hose leakage or pinching;
4. Check whether the hydraulic oil in the oil tank is sufficient (the liquid level should be above 1/2 of the volume of the oil tank);
5. Check whether the suction line device is loose, whether there are capillary cracks at the suction port of the pump, and the suction line should always have oil and no air bubbles;
Nick reminds you that during the use of the product, you must operate in accordance with strict operating instructions, which can not only protect the safety of the operator, but also reduce the wear and tear of the equipment and prolong the service life of the equipment.
Post time: Dec-01-2023