Cleaning of waste aluminum baler
Scrap aluminum baler, scrap iron baler, scrap steel baler
The cleaning of the internal hydraulic system of the vertical scrap aluminum baler is usually inappropriate or incorrect, because there is a broken hydraulic system in the work of the scrap aluminum baler. Therefore, in normal work, the cleaning work of the baler cannot be underestimated. Now people discuss the common problems of cleaning the automatic scrap aluminum baler.
First, apply a high-viscosity cleaning oil. When cleaning, fill the fuel tank of the straw baler with oil and heat it to 50-80 degrees Celsius.
Next, start the hydraulic oil pump and let it air through the gas. The purpose of doing this is to accept the effect of removing the annotation.
Then, clean the filter for 20 minutes, check the pollution of the oil filter, and repeat until there is no more air pollutants in the filter.
Finally, for the more disordered hydraulic system, it can be cleaned according to the working area. It can connect the hydraulic cylinder, let the hydraulic cylinder move repeatedly, and perform system cleaning.
Nick's mechanical pressing technology and finishing technology have reached the international advanced level. Our company can provide a complete set of technology from raw material formula, press molding, heat treatment and finishing, https://www.nkbaler.com
Post time: Sep-27-2023