Scrap Metal Baler Manufacturer
Scrap Baler, Scrap Iron Baler, Metal Baler
Metal balers may have some failures when packaging items. This kind of thing can be said to be unavoidable. No matter how good the quality of the machine is, there will inevitably be
some small defects. Although it is not a serious problem, there are often some small defects.
The problem will also affect the normal work efficiency. The following has sorted out some common faults for your convenience:
1. The reducer fails. Handling points: When returning to zero, the cam does not touch the LS5, and the high point is upward or downward. At this time, the reducer is worn out, and the
reducer should be replaced.
2. The oil pump is noisy. The reasons for this may be the oil pump suction, the blockage of the filter screen, the leakage of the oil suction pipe or the oil inlet of the pump, the
fracture of the plunger, the fracture of the bearing, etc. The main points of treatment are to find out the cause of the failure, clear the blockage, and replace the damaged parts. .
3. There is oil leakage in the hydraulic system. The occurrence of oil leakage is generally related to the aging of the seal, the falling of the seal or the loose connection.
4. The oil pump is insufficient or has no pressure. This situation is generally caused by the wear of the oil pump body, the oil distribution plate or the damage of the plunger. In this
case, the oil pump needs to be repaired or a new oil pump should be replaced.
5. The crossbar electromagnet is not working properly. Handling points: The crossbar electromagnet does not work, of course, it cannot be automatically taken out. In this case,
check whether the electromagnet wire is off, check whether it is displaced, burned out, or whether it has chips
Knowing some problems and failures that often occur in the use of metal balers, operators can quickly deal with them, and they do not need to wait for professional after-sales personnel
from metal balers manufacturers to come to the door to avoid wasting time and save costs.
NKBALER provides professional metal baler solutions and perfect after-sales service, choose us and save your time. Our hotline: 86-29-86031588
Post time: Jun-28-2023