Waste Paper Baler, Waste Newspaper Baler, Corrugated Paper Baler
The oil pump of the horizontal waste paper baler generally has a plunger pump and a vanepump. The reasons for the loud noise of the oil pump system may include: loosening of the
fastening screws of the oil pump; wear of the power bearing or stator of the oil pump;serious damage to the oil pump; inside the oil tank Air bubbles, poor oil intake of the
hydraulic pump and other reasons will cause this problem. At this time, we should analyze the specific situation and solve the problem of excessive noise in the hydraulic waste paper
baler oil pump!
The possible causes of the failure of the oil pump overheating problem are that the oil pipe is blocked, causing the pressure of the hydraulic oil to increase; the power of the oil pump
is too large and overloaded; the hydraulic oil is used unreasonably and the viscosity is too high.
The quality of the hydraulic oil of the hydraulic waste paper Baler has a great influence on the hydraulic pump. The replacement cycle of the plunger pump is generally one year. If the
plunger pump is noisy, it is recommended to consider replacing the plunger pump plunger.
The waste paper baler is used to extrude waste paper and similar products under normal conditions to greatly reduce the volume, so as to reduce the transportation volume, save the
freight, and increase the benefits for the enterprise. www.nkbaler.net
Post time: Jun-12-2023