The horizontal hydraulic baler, extensively used in the recycling industry for waste paper, plastics, metals, and other materials, is known for its efficiency, energy conservation, and environmental friendliness.It can compact waste materials into standard blocks, facilitating easy storage and transportation. Here, we will detail the operation procedure of the horizontal hydraulic baling manchine.Before starting the operation, operators must thoroughly inspect all parts of the equipment to ensure they are functioning properly, including power connections, hydraulic hose connections, and the operation of the oil pump motor.Additionally, it is crucial to ensure that the materials to be baled meet the equipment’s load requirements to prevent overloading, which could lead to equipment damage or safety incidents.Operation Procedure: Place the waste materials into the baler’s hopper, being careful not to exceed the equipment’s capacity. Close the hopper door securely to ensure a tight fit with the equipment, preventing oil leakage or poor baling results due to poor sealing.Activate the hydraulic oil pump to start the compression and baling process. During this process, operators should monitor changes in hydraulic oil pressure and the working status of the baler closely.If any abnormalities are detected, stop the machine immediately for inspection.
When the baler reaches the preset compression stroke, it will automatically stop and release the pressure.At this point, operators should check if the baler is functioning normally. If no issues are found, proceed to the next step. After a baling cycle is completed, reset the baler and open the hopper door to remove the baled material.Then, place new materials into the hopper and repeat the baling process.The operation procedure for the horizontal hydraulic baling press is simple and easy to learn, requiring only basic training.During actual operation, operators must strictly follow operational procedures and safety precautions to ensure both equipment and personal safety.Regular inspections and maintenance of the equipment are also essential to ensure its normal operation and extend its service life.
Post time: Jul-31-2024