Automatic Baler Manufacturers
Plastic Bottle Baler, Rigid Plastic Baler, Oil Tank Baler
The noise generated by the plastic bottle semi-automatic baler in normal production is very small, if the equipment has an unbearable noise problem during work. Then it means that the machine has problems in some aspects, and the reason for the noise of the horizontal plastic
bottle baler may be improper operation, or the daily maintenance is not in place. In view of the noise problem during the Baling press process of the plastic bottle semi-automatic baling press machine, several solutions are proposed below according to different situations:
1. Check whether the pilot valve (cone valve) is worn and whether it can be tightly fitted with the valve seat. If it is not normal, the pilot valve head should be replaced.
2. Check whether the pressure regulating spring of the pilot valve is deformed and twisted.
If it is twisted, replace the spring or replace the pilot valve head.
3. Check whether the oil pump and the motor coupling are installed concentrically and centered. If they are not concentric, they should be adjusted.
4. Check whether there is vibration in the waste paper baler pipeline, and add sound insulation and vibration damping pipe clamps where there is vibration.
5. The joints at the oil confluence of the dual-pump or multi-pump combined oil supply should be reasonable, otherwise vibration and noise will be generated due to eddy current cavitation.
NICKBALER has a mature after-sales service system, 7 * 24 hours professional hotline service 86-29-86031588, quickly help you solve any incurable diseases, is your best choice!
Post time: Jul-26-2023