Construction of waste paper baler
waste paper baler, waste newspaper baler, corrugated paper baler
There are always various failures during the use of the waste paper baler, and the main cause of these failures is mostly caused by the oil pump. Although the oil pump is small, it is constantly rotating, and only it operates normally The baler will continue to work. The following is the maintenance of its problems introduced by Nick Machinery.
The oil pump does not discharge oil: mainly there are oil pump failures, oil suction pipe failures, fuel tank filter failures, and oil pump motor failures. If the above problems occur, they can be solved in this way.
1. The fuel tank filter of the waste paper baler refuels on the oil surface or redesigns the oil surface height.
2. The oil pump blades cannot slide out from the rotor groove, repair the oil pump or replace the oil pump
3. If the rotation direction is wrong, stop immediately and correct the rotation direction of the motor. If it continues, the oil pump will be burned or damaged.
4. The suction pipe of the waste paper baler is blocked, check the suction pipe.
5. The fuel tank filter is clogged, clean or replace the filter.
6. The suction pipe of the oil pump is sealed, and the step of threading the waste paper baler is to check the suction pipe for gas.
Nick Machinery has continuously improved its technology to improve the efficiency of waste paper packaging. It has fully combined foreign advanced production technology and domestic excellent production technology to produce a waste paper baler with high packaging efficiency and automatic production. Meet the production needs of customers and add luster to the sustainable development of resources. https://www.nkbaler.com
Post time: Aug-28-2023