Understand the Precautions When Using a Waste Paper Baler waste paper baler is a packing machine that requires bagging. A cost-effective waste paper baler not only packs waste paper and rice husks but also can package various soft materials such as wood shavings, sawdust, and cottonseed husks. This type of waste paper baler has gained good reputation in the Chinese market.Let’s explore the precautions for using a waste paper baler:Proper use of waste paper baler equipment, diligent maintenance, and strict adherence to safety operation procedures are essential conditions for extending the life of the machine, improving production efficiency, and ensuring safe production. Therefore, it is recommended that users establish maintenance and safety operation procedures. Besides being familiar with the machine structure and operation procedures, operators must also pay attention to the following points:The hydraulic oil added to the tank must be of high quality anti-wear hydraulic oil, strictly filtered, and always maintained at an adequate level; if low, it should be topped up immediately.The oil tank should be cleaned and replaced with new oil every six months, but the cleaning and filtering of used oil should not exceed one month. Used new oil, after strict filtration, is allowed to be reused once.Each lubrication point of the waste paper baler should be lubricated at least once per shift as required.Foreign objects inside the material box should be cleaned promptly.Those who are unfamiliar with the machine structure, performance, and operating procedures through learning should not operate the machine on their own.When the machine experiences severe oil leakage or abnormal phenomena during operation, it must be stopped immediately to analyze the cause and troubleshoot, and should not be operated while faulty.During operation of the waste paper baler, repairs or contact with moving parts should not be attempted, and it is strictly forbidden to press materials inside the material box with hands or feet.Adjustments to pumps, valves, and pressure gauges must be carried out by experienced technicians. If a pressure gauge is found to be faulty, it should be inspected or replaced immediately.Users of waste paper balers should develop detailed maintenance and safety operation procedures based on specific circumstances.What about the inspection and maintenance of waste paper balers?Waste paper balers are widely used in various waste paper factories, old goods recycling companies, and other enterprises, suitable for packing and recycling of old goods, waste paper, plastic straws, etc. They are excellent devices for improving labor efficiency, reducing labor intensity, saving manpower, and reducing transportation costs.Parts of the waste paper baler must be maintained daily; otherwise, it could lead to the aging of the waste paper baler, and in severe cases, fully automatic waste paper baler equipment may become obsolete. Therefore, maintenance is very important.Only when the force applied is slightly greater than the force of the spring on the valve core in the relief valve, can the valve core move, allowing the valve port to open so that the oil from the waste paper baler flows back to the tank through the relief valve, and the output pressure of the pump will no longer rise.
The oil pressure at the outlet of the waste paper baler‘s hydraulic pump is determined by the relief valve, which is different from the pressure in the hydraulic cylinder (determined by the load); because there is pressure loss when the hydraulic oil flows through the pipeline and components in the hydraulic system, the pressure value at the outlet of the hydraulic pump is greater than that in the hydraulic cylinder. The main function of the relief valve in the hydraulic system is to regulate and stabilize the maximum working pressure of the system.Before using a waste paper baler, it is necessary to thoroughly inspect whether all parts of the machine are intact, whether the oil is sufficient and clean, and whether the circuit is normal.
Post time: Aug-19-2024