Hydraulic Baler Instruction Manual
Metal Balers, Non-Metal Balers, Hydraulic Balers
The hydraulic baler mainly uses the hydraulic cylinder to "output" objects, but once the hydraulic cylinder has a problem, it will not only affect the normal use, but also need to determine the fault. Today, some customers responded that the hydraulic baler oil cylinder could not go up and down, as if it was stuck. What is the cause? How can we troubleshoot the problem?
First check the hydraulic baler oil cylinder and eliminate it step by step as follows:
1.First find a pressure gauge to check the pressure in the valve? And know the stroke and working pressure of the hydraulic cylinder.
2.Check each fitting on the hydraulic valve block for oil seepage or leakage. And know if the manual generation or the control generation is working properly.
3.Whether the load when the hydraulic cylinder is loaded is abnormal.
4.To remove the above is to see if the working pressure of the overflow raft is low, and then adjust it.
5.If none of the above is to consider whether the cylinder is stuck or there is an obstruction in the valve block.
NICKBALER machinery provides: horizontal hydraulic baler, vertical hydraulic baler, waste paper baler and other baling machine equipment, company website: www.nkbaler.net, telephone: 86-29-86031588, looking forward to long-term cooperation with you!
Post time: Mar-29-2023