Plastic Baler
Plastic Baler, Plastic Film Baler, Pet Bottle Baler
The continuous upgrading of balers has also promoted the rapid development of products. Therefore, plastic balers have become active in the market, but users are not professional designers after all, and how to solve the problem is very important. So what causes the plastic baler to not work effectively? Follow Nick to learn together, I hope it can be helpful to everyone, the details are as follows:
1. The oil supply pressure of the oil pump cannot meet the flow requirements. In order to prevent oil leakage, strict inspection and testing must be carried out before the plastic baler is operated.
2. Once the safety valve in the plastic baler is deformed, it will seriously affect the blockage of the main valve core. The main valve stem is blocked in a small hole, which is easy to cause part of the oil pressure of the plastic baler oil pump to return to the fuel tank, so that the oil in the plastic baler leaks out and flows to the fuel tank. The actuator is greatly reduced, which reduces the oil feed rate.
3. Serious oil leakage inside and outside. When running fast, it is easy to cause the oil supply pressure to be too low, but the pressure is much higher than the pressure in the oil return line. The sides of the plastic packing cylinder can cause excessive internal leakage when the packing cylinder piston seal is damaged. As a result, the cylinder speed of the plastic baler is not high enough, and oil leakage may occur in other parts.
4. Various reasons such as the lubrication of the guide rails in the plastic baler and the poor positioning and assembly of the oil cylinder can easily lead to an increase in the frictional resistance during the operation of the plastic baler.
If you still have questions, you can consult on our website https://www.nickbaler.net
Post time: Jul-06-2023