The operation and maintenance of the horizontal waste paper baler mainly includes the following aspects:
1. Check the equipment: Before starting the equipment, check whether all parts of the equipment are normal, including the hydraulic system, electrical system, transmission system, etc.
2. Start the equipment: turn on the power switch, start the hydraulic pump, and check whether the hydraulic system is working properly.
3. Operating equipment: Put the waste paper into the working area of the baler, control the operation of the equipment through the operation panel, and perform baling operations.
4. Maintain equipment: Clean and lubricate the equipment regularly to keep the equipment clean and in good operating condition. For hydraulic systems, the hydraulic oil should be replaced regularly, and for electrical systems, the connections of wires and electrical appliances should be regularly checked to see if they are in good condition.
5. Troubleshooting: If the equipment fails, the equipment should be stopped immediately to find out the cause of the failure and repair it. If you cannot repair it yourself, you should contact the equipment manufacturer or professional maintenance personnel in time.
6. Safe operation: When operating equipment, safe operating procedures should be followed to avoid safety accidents. For example, do not touch the moving parts of the equipment while the equipment is running, do not smoke near the equipment, etc.
7. Records and reports: The operation of the equipment should be recorded regularly, including the operation time of the equipment, the number of packages, fault conditions, etc., and reported to superiors in a timely manner.
Post time: Mar-13-2024