News
-
What preparations need to be made before restarting the baler?
Before restarting a baler that has not been used for a long time, the following preparations are required: 1. Check the overall condition of the baler to make sure it is not damaged or rusted. If a problem is found, it needs to be repaired first. 2. Clean the dust and de...Read more -
Why does the hydraulic baler slow down when baling?
The slow speed of the hydraulic baler during baling may be caused by the following reasons: 1. Hydraulic system failure: The core of the hydraulic baler is the hydraulic system. If the hydraulic system fails, such as the oil pump, hydraulic valve and other components are...Read more -
What to do if there is a leak in the hydraulic system?
If a leak occurs in the hydraulic system, the following measures should be taken immediately: 1. Shut down the system: First, turn off the power supply and hydraulic pump of the hydraulic system. This will prevent the leak from getting worse and keep you safe. 2. Locate ...Read more -
What safety matters need to be paid attention to when using a hydraulic baler?
Recently, a number of industrial accidents have attracted widespread social attention, among which safety accidents caused by improper operation of hydraulic balers occur frequently. For this reason, experts remind that strict safety operating procedures must be followed...Read more -
What should I do if the baler has insufficient pressure and insufficient compression density?
At Nick machinery, staff recently discovered that the pressure of the baler was insufficient, resulting in substandard compression density, which affected the normal processing efficiency of waste materials. After analysis by the technical team, the reason may be related...Read more -
What principle does the hydraulic baler use?
Hydraulic baler is a baler that uses the principle of hydraulic transmission. It uses high-pressure liquid generated by the hydraulic system to drive the piston or plunger to perform compression work. This kind of equipment is usually used to compress loose materials suc...Read more -
China’s first fully automatic baling machine with door was born.
Recently, China successfully developed the first fully automatic baling machine with doors, which is another important achievement achieved by my country in the field of agricultural mechanization. The advent of this baling machine will greatly improve agricultural produ...Read more -
What is an open end extrusion baler?
Open end extrusion baler is a piece of equipment specially designed for processing and compressing various soft materials (such as plastic film, paper, textiles, biomass, etc.). Its main function is to squeeze and compress loose waste materials into high-density blocks o...Read more -
What is an L type baler or Z type Baler?
L-type balers and Z-type balers are two types of balers with different designs. They are usually used to compress agricultural materials (such as hay, straw, pasture, etc.) into bales of specified shapes and sizes for easy storage. and transportation. 1. L-type baler (L-...Read more -
Which requires more better : horizontal or vertical balers?
In agriculture and waste management, a baler is a commonly used piece of equipment used to compress straw, forage or other materials into bales for storage or transportation. Horizontal balers and vertical balers are two common types, each with their own pros and cons. W...Read more -
How many cylinders in a horizontal baler ?
In the agriculture and recycling industries, horizontal balers are a common piece of equipment used to compress materials such as straw, forage, and plastic film into blocks for storage or transportation. Recently, a new horizontal baler on the market has attracted wides...Read more -
What is Best horizontal baling machine?
Horizontal Baling Machine is a device used to compress and pack materials such as straw and pasture into blocks. It is widely used in agriculture and animal husbandry. Among the many horizontal balers, to select the best model, you need to consider the following factors:...Read more