The process of production and use of wood chips and straw balers

Process of sawdust straw baler
Sawdust baler, straw baler, paper baler
The production and use of wood chips and straw balers has various advantages and characteristics, but what is the specific process of production and use of wood chips and straw balers?
1. Raw material ⇒ crushing ⇒ dust removal ⇒ iron removal ⇒ transportation ⇒ iron removal ⇒ stirring ⇒ high temperature compression ⇒ packaging storage ⇒ transportation
2. Before the straw baler is produced, the moisture content of the material should be dried to 10-18%, and then sent to the belt conveyor, passing through the iron remover and drum screen, and the metal substances, large wood and stones, etc. The impurities are separated, and then dried to the required moisture size through the airflow dryer.
3. Under the action of its own gravity, the material passes through the quantitative conveyor and modulator and then enters the granulation chamber of the straw baler. The delivery volume of the feeding material can be controlled by the frequency converter on the quantitative conveyor.
4. The straw baler compresses the sawdust into a long round rod with a diameter of 8mm and extrudes it. At the exit of the round rod, the steel tooth cutter is used to cut the round handle into a certain length of granules.
5. The temperature of the granules just produced by the straw baler is very high, and it needs to be transported to the counter-flow cooler through the bucket elevator again to cool the granules to room temperature.

Nick brand straw baler is fully reliable, low power consumption, economical and reasonable, easy to use, easy to maintain and operate, it is a good helper for your production. https://www.nickbaler.com