Abnormal sound occurs when the gantry shearing machine is in use
Gantry shears, crocodile shears
With the development of science and technology, gantry shearing machine, as a kind of efficient metal cutting equipment, is used by more and more enterprises. However, in the process of using the gantry shearing machine, many users will encounter abnormal sound, and this problem cannot be ignored.
Possible causes of abnormal sound: worn parts, poor lubrication, motor failure, equipment installation problems
Solution to abnormal sound
1. Maintenance: Regular maintenance of the gantry shearing machine is the most basic method.
2. Replace parts: If a part is found to be severely worn, it needs to be replaced in time.
3. Adjust the motor: If the motor is found to be faulty, it needs to be adjusted or replaced.
4. Reinstall the device: If the abnormal sound is caused by a problem with the installation of the device, then the device needs to be reinstalled.
It is not uncommon for the gantry shearing machine to have abnormal sound during use, but we cannot turn a blind eye to it. By understanding the characteristics and possible causes of abnormal sounds, we can take timely measures to solve the problem.
The above are the points summed up by Nick Baler through more than ten years of experience. If you still don’t understand something, you can go to the website for consultation at any time: https://www.nickbaler.net
Post time: Nov-16-2023