Plastic Bottle Baler, Pet Bottle Baler, Beverage Bottle Baler
Regardless of the performance of the plastic bottle baler, it can be summarized as the working form of the plastic bottle baler. The work must ensure the stability of the operation to ensure the uniformity of the package. So what is the reason that the plastic bottle baler can't work quickly?
1. The oil supply pressure of the plastic bottle Baling Press oil pump cannot meet the flow requirement. In order to prevent the occurrence of oil leakage, strict inspection and testing must be carried out before work.
2. If the overflow valve is deformed in the plastic bottle baler, it will seriously affect the blockage of the main valve core. The main valve core is blocked at the small opening, which will easily cause some pressure oil output by the Baling Press oil pump to overflow back into the fuel tank, causing the Baling Press machine to overflow. The flow of medium oil into the actuator is greatly reduced, which slows down the speed of oil supply.
3. Internal and external oil leakage is relatively serious. In fast work, it is easy to cause the oil supply pressure to be too low, but it is much higher than the oil return oil circuit. When the piston seal of the baling oil cylinder is damaged, the two sides of the baling oil cylinder are easy to be damaged. The accident that caused the excessive internal leakage caused the fast movement speed of the plastic bottle baler oil cylinder to be insufficient, and other parts were prone to oil leakage.
4. A series of reasons such as rail lubrication and oil failure, poor installation accuracy and assembly accuracy of the oil cylinder in the plastic bottle baler, are likely to increase the frictional resistance when the baler is working.
NKBALER recommends that you should follow the safety operation rules safely, do not overload the equipment, and eliminate unsafe factors in time when a fault occurs. www.nkbalers.com
Post time: Jun-06-2023