Precautions for hydraulic oil pump of straw baler
Straw baler, sawdust baler, rice husk baler
When installing the straw baler, we should pay attention to some details to prevent the machine from malfunctioning. The following are the matters that should be paid attention to during the whole process of installing the hydraulic oil pump of the straw baler:
1. The installation of the oil pump is good or bad, which has a very important impact on the smooth operation and service life of the pump. Therefore, the installation and calibration work should be carried out as carefully as possible, and it cannot be done rashly.
2. The installation height, length and pipe diameter of the oil pump suction pipe should take into account the calculated value, try to be simple and clear, reduce unnecessary damage (such as elbows, etc.); and ensure that the pump does not exceed its allowable NPSH when it is working.
3. The inner diameter of the oil suction pipeline should not be smaller than the specified requirements, and the oil suction pipeline should not be too long.
4. The suction and discharge pipelines of the oil pump should have fixed brackets, which are not allowed to bear the load of the pipeline.
5. The location where the oil pump is installed should be large enough to facilitate maintenance work.
After the Nick Machinery straw baler is put on the market, it can solve the problem of straw recycling, improve the environmental pollution caused by rural straw burning, and improve the quality of straw and grass utilization, which has played a huge role in promoting. https://www.nkbaler.com
Post time: Sep-20-2023