Wear of Hydraulic Metals
scrap metal baler, scrap iron baler, scrap steel baler
It is inevitable that mechanical equipment will wear and tear during work. It is precisely because of the existence of friction that the equipment can run and work, but at the same time, because of the existence of friction, it also causes wear and tear between mechanical equipment. Wear and tear do the following.
1. Normal wear and tear
The wear in normal use is called the normal wear of the hydraulic metal baler. This kind of wear generally occurs when the new equipment is used. Because the new friction surface has a certain roughness, the real contact surface is small, and the wear is relatively fast. The surface is gradually smoothed, the real contact area increases, and the hydraulic metal baler gradually enters the normal and stable wear stage, and the wear of the friction surface is slight and slow and stable.
2. Adhesive wear
It refers to the sign that the material of the contact surface is transferred from one surface to another surface due to solid phase welding at the real contact point. This situation is called adhesive wear. When solid phase welding occurs in hydraulic metal balers, The temperature at the actual point of contact may or may not exceed the melting point.
Nick mechanical metal baler can extrude various metal scraps, steel shavings, scrap iron, scrap steel, scrap aluminum, scrap copper, etc. into qualified furnace materials in various shapes such as rectangles, cylinders, octagons, etc. cost. https://www.nkbaler.com
Post time: Nov-15-2023