If a leak occurs in the hydraulic system, the following measures should be taken immediately:
1. Shut down the system: First, turn off the power supply and hydraulic pump of the hydraulic system. This will prevent the leak from getting worse and keep you safe.
2. Locate the leak: Check various parts of the hydraulic system to determine the source of the leak. This may include inspection of pipes, fittings, valves, pumps and other components.
3. Repair or replace damaged parts: Once the leak is found, repair or replace it depending on the extent of the damage. This may include replacing cracked pipes, tightening loose joints, or replacing damaged seals.
4. Clean the leak area: After repairing a leak, be sure to clean the leak area to prevent contamination and slip and fall accidents.
5. Restart the system: After repairing the leak and cleaning the leaking area, restart the hydraulic system. Before starting, make sure all connections are tight, all valves are open, and there is no air in the system.
6. Observe system operation: After restarting the system, carefully observe its operation to ensure that the leak has been resolved. If the leak persists, further inspection and repair may be required.
7. Regular maintenance: To prevent future leaks, have your hydraulic system inspected and maintained regularly. This includes checking the cleanliness and level of the hydraulic oil, as well as inspecting all components and connections in the system.
In short, when a hydraulic system leak is discovered, measures should be taken immediately to locate the leak point and repair it. At the same time, maintain the hydraulic system regularly to ensure its normal operation and prevent leaks.
Post time: Feb-05-2024